Technical data
14
01.00 | AGE-U | Assembly and Operating manual | en | 1393226
Rotational breakaway torque about Z-axis
Breakaway torque
Supply pressure
Progressive curve
If the applied load is too large (equal to or greater than the
breakaway torque), an angular deflection may occur, that is,
undesirable tilting about the X- or Y-axis. To avoid this deflection,
it can be estimated. In this case, the X/Y moment, supply pressure,
payload and distance to the center of gravity must be observed.
Estimating the X/Y moment
Angular displacement as a function of X/Y moment
M = F x A
M
Maximum moment [lb(f)in]
F
Sum of applied forces
A
Distance between tool plate of the compensation unit and
center of gravity of the applied load