Assembly
01.00 | AGE-U | Assembly and Operating manual | en | 1393226
27
5.4 Mounting the MMS 22 magnetic switch
NOTE
Observe the assembly and operating manual of the sensor for
mounting and connecting.
NOTICE
Risk of damage to the sensor during assembly!
•
Observe the maximal tightening torque.
Ø
Connect the sensor (1), see Sensor Assembly and Operating
Manual.
Ø
Place the product in the centered home position,
Ø
Slide the sensor (1) into the groove (2).
Ø
Pull the sensor (1) back again slowly until it activates.
Ø
Secure the sensor (1) using the set screw (3).
Tightening torque: 10 Ncm
Ø
Bring the product into position and test for proper functioning.