Translation of original declaration of incorporation
52
03.00 | GSM-W | Assembly and operating manual | en | 389108
9 Translation of original declaration of incorporation
in terms of the Directive 2006/42/EG, Annex II, Part 1.B of the European Parliament and of
the Council on machinery.
Manufacturer/
Distributor
SCHUNK GmbH & Co. KG Spann- und Greiftechnik
Bahnhofstr. 106 – 134
D-74348 Lauffen/Neckar
We hereby declare that on the date of the declaration the following partly completed
machine complied with all basic safety and health regulations found in the directive
2006/42/EC of the European Parliament and of the Council on machinery. The declaration
is rendered invalid if modifications are made to the product.
Product designation:
Rotary gripping module with angular gripper / GSM-W /
pneumatic
ID number
0303816 / 0303817 / 0303836 / 0303936 / 0303837 /
0303937 / 0303846 / 0303946 / 0303847 / 0303947 /
0303856 / 0303956 / 0303857 / 0303957 / 0303876 /
0303976 / 0303877 / 0303977 / 0303886 / 0303986 /
0303887 / 0303987 / 0304616 / 0304617 / 0304636 /
0304736 / 0304637 / 0304737 / 0304646 / 0304746 /
0304647 / 0304747 / 0304656 / 0304756 / 0304657 /
0304757 / 0304676 / 0304776 / 0304677 / 0304777 /
0304686 / 0304786 / 0304687 / 0304787
The partly completed machine may not be put into operation until conformity of the
machine into which the partly completed machine is to be installed with the provisions of
the Machinery Directive (2006/42/EC) is confirmed.
Applied harmonized standards, especially:
EN ISO 12100:2010
Safety of machinery - General principles for design -
Risk assessment and risk reduction
The manufacturer agrees to forward on demand the relevant technical documentation for
the partly completed machinery in electronic form to national authorities.
The relevant technical documentation according to Annex VII, Part B, belonging to the
partly completed machinery, has been created.
Person authorized to compile the technical documentation:
Robert Leuthner, Address: see manufacturer's address
Lauffen/Neckar, April 2019
p.p. Ralf Winkler, Manager for development of
gripping system components
