Assembly
5.2 Connections
5.2.1 Mechanical connection
Evenness of the
mounting surface
The values apply to the whole mounting surface to which the
product is mounted.
Requirements for evenness of the mounting surface (Dimensions in mm)
Edge length
Permissible unevenness
< 100
< 0.02
> 100
< 0.05
Mounting of the
gripper
The gripper can be fastened at the side with screws (4). For
centering, use the two sleeves (5) from the accessory pack. The
mounting of the gripper at the bottom to an adapter plate is done
using M6 screws.
NOTICE
The gripper will be damaged if you exceed the maximum depth
of engagement for the mounting screws.
The depth of engagement of 13 mm (effective thread length, 9
mm) for fastening the base of the gripper absolutely must be
observed.
Ite
m
Designation
KGG 220
1
Threads for mounting screws
M6 (4x)
2
Screw-in depth
13 mm
3
Threads for mounting screws
M6 x 13
Effective thread length
9 mm
4
Screw according to standard
DIN EN ISO 4762 M5 x 55 (4x)
5
Centering sleeve
Ø 10
H7
x 4 (2x)
17
04.00 | KGG 220 - 280 | Assembly and Operating Manual | en | 389168
