_________________________________________________________________________________________
www.schunk.de
XND.00018.002_A – 10/2018
22
3
Description of the clamping device
The KSC2 has been designed for centric clamping of raw parts and finished workpieces.
A wide range of accessories ensures the versatility of the equipment.
The force is generated purely mechanically. The power gear ratio is linear across
the whole clamping range.
Exceeding the maximum torque results in damage to the spindle.
The KSC2 can be mounted and dismounted with just a few hand movements.
3.1
Function
The KSC2 is a direct clamping device. The mechanical drive functions via a threaded spindle.
The force is generated directly in a linear manner, without a force amplifier.
The clamping forces depend on the torque.
Both jaws and carriages close respectively open synchronously and are symmetrical with
respect to the position holes in the tool body.
With the quick-change system it is not possible to clamp from the inside against the outside.
The clamping range depends on the jaw range and the model size used.
