Assembly
05.00|21151452 KSP plus-IN, KSP-LH plus-IN, KSP plus-IN2, KSP-LH plus-IN2 |en
21
Fig.°3 Connecting the clamping block
The clamping force block has four air connections:
I, II, III, IV
.
Two connections for OPEN (
I
and
III
) and two connections for
CLOSE (
II
and
IV
).
Which of the two air connections has to be opened for actuation
depends on the application:
• Connections
I
and
II
for operation without a base plate.
• Connections
III
and
IV
in the base for hose-free, direct
connection to the machine table or on the base plate.
The threads for hose-free, direct connection are not designed for
pneumatic fittings.
Thread for pneumatic screwed connection (on the front):
KSPplus 100-IN and IN2, KSP-LH plus 100-IN and IN2: M5
KSPplus 160-IN and IN2, KSP-LH plus 160-IN and IN2: G1/8"
KSPplus 250-IN and IN2, KSP-LH plus 250-IN and IN2: G1/8"
NOTE:
All four air connections come sealed on delivery of the clamping
force block. On base side with set-screws (item 23) and on front
with locking screws (item 11).
