Technical data
16
03.00 | MEG 50 EC | Assembly and Operating Manual | en | 389201
3 Technical data
3.1 Gripper MEG 64 EC
Stroke per finger [mm]
8.5
Gripping force [N] *
60 – 90
Workpiece weight [kg]
(Recommendation) [kg] **
0.5
Power supply [VDC] (nominal range)
Supply via MEG C 50
Current input
Input via MEG C 50
Max. speed (gripping) [mm/s]
35
Weight [kg]
0.71
Max. permissible finger length [mm]
50
Min. ambient temperature [°C]
Max. ambient temperature [°C]
+5
+55
Repeatability [mm] ***
0.02
IP rating
30
Noise emission [dB(A)]
≤ 70
*
Gripping force is the arithmetical sum of the individual
forces acting on the gripper jaws at a distance of P=25 mm.
**
Values for friction coefficient µ = 0.1 and safety factor v = 2.
The values can be increased in the case of form-fitting.
*** Distribution of the mechanical end positions after 100
consecutive strokes.
A controller is needed to operate the gripper. For this purpose, SCHUNK offers the MEG C 50 (ID number 307005).
More technical data is included in the catalog data sheet.
Whichever is the latest version.
3.2 Controller MEG C
Power supply [VDC]
24
Max. Current input [A]
1.5
Weight [kg]
0.3
IP rating
30
Nominal temperature range [°C]
-10 to 65
Setting options
• Force setting
• Closing and opening times
(speed)
• Stroke adjustment
Interface
Digital / Analog I/Os
