Function
40
02.00|NSL3 turn 450-3, 450-3-Z, 570-5, 570-5-Z |en
Function
The clamping function of the clamping station ensures fast and
accurate changing of clamping pallets.
The clamping pallet is locked in the VERO-S quick change clamping
modules and positioned by means of the respective alignment
elements, such as clamping pins or centering cones. Two air
connections accessible from outside supply the functions of the
clamping system with the required system pressure.
Functioning principle of the flexible centering cone
By means of the centering taper built in the turning center, the
highest repeat accuracy is achieved based on the run-out accuracy
of the clamping design.
The patented centering taper is a mechanical alignment element
and has a radially slotted taper clamping face with several ribs.
Centering taper with coupled centering sleeve
1
Centering sleeve
2
Center seating for clamping pallet
3
Centering taper, flexible
4
Taper surfaces with elastic ribs
5
Center seating for base plate
6
Turning center
7
Axial load, flexible
8
Radial load, rigid
5
5.1
