Basic safety notes
12
02.00|NSL3 turn 450-3, 450-3-Z, 570-5, 570-5-Z |en
The following personal qualifications are necessary for the various
activities related to the product:
Due to their technical training, knowledge and experience, trained
electricians are able to work on electrical systems, recognize and
avoid possible dangers and know the relevant standards and
regulations.
Due to its technical training, knowledge and experience, qualified
personnel is able to perform the delegated tasks, recognize and
avoid possible dangers and knows the relevant standards and
regulations.
Instructed persons were instructed by the operator about the
delegated tasks and possible dangers due to improper behaviour.
Due to its technical training, knowledge and experience, service
personnel of the manufacturer is able to perform the delegated
tasks and to recognize and avoid possible dangers.
Personal protective equipment
Use of personal protective equipment
Personal protective equipment serves to protect staff against
danger which may interfere with their health or safety at work.
•
When working on and with the product, observe the
occupational health and safety regulations and wear the
required personal protective equipment.
•
Observe the valid safety and accident prevention regulations.
•
Wear protective gloves to guard against sharp edges and
corners or rough surfaces.
•
Wear heat-resistant protective gloves when handling hot
surfaces.
•
Wear protective gloves and safety goggles when handling
hazardous substances.
•
Wear close-fitting protective clothing and also wear long hair in
a hairnet when dealing with moving components.
Trained electrician
Qualified personnel
Instructed person
Service personnel of
the manufacturer
2.7
