General
06.00 | PPU-P | Assembly and Operating Manual | en | 389323
7
1.1.4.2 Base plate mounting kit
Designation
ID number
Base plate mounting kit
AS-PPU-P10-GPL
0314702
Base plate mounting kit
AS-PPU-P30-GPL
0314707
For easy mounting of the PPU-P from above.
Parts included:
• Centering pins for exact positioning on PPU-P.
• Connecting screws for mounting on PPU-P.
1.1.4.3 Anti-fall device
CAUTION
Damage to the rod lock due to incorrect actuation / overload!
The rod lock can be damaged due to incorrect actuation or
overload.
•
The rod lock may only be triggered and unlocked when the
product has been shut down or is in its waiting position.
•
Observe the specifications for the static holding force. The
occuring forces in clamped condition may not exceed the
retention force.
•
In the event of a dynamic load or overload (e.g. drop in
pressure during movement), the clamping cartridge must be
checked and replaced if necessary.
WARNING
The rod lock is not a safety component for personal protection
in the sense of the Machine Directive.
Prevents payload from falling from the stand-by position in case of
pressure loss.
Designation
ID number
Anti-fall device ASP-P010
0314703
Anti-fall device ASP-P030
0314708