Assembly
08.00 | PZB-plus | Assembly and Operating Manual | en | 389366
21
Item Mounting
PZB-plus
50
64
80 100
125
160
200
240
300
2
Mounting screw (3 x)
M4
M6 M8 M8 M10 M10 M12
-
-
Max. depth of engagement
from locating surface [mm]
• without gripping force
maintenance
10
14
16
18
18
18
25
-
-
Max. depth of engagement
from locating surface [mm]
• with gripping force
maintenance (AS / IS)
20
26
32
38
45
46
60
-
-
3
Fitting bore for centering
pins [mm] *
Ø 3
Ø 4 Ø 5 Ø 5
Ø 6
Ø 6
Ø 8
Ø 8
Ø 10
Possible recess in the adapter plate
A
Max. recess [mm]
Ø 32 Ø 40 Ø 55 Ø 70 Ø 85 Ø 115 Ø 150
Ø 196
Ø 236
Affixing the gripper fingers
4
Mounting screw (2x)
M2.5 M3 M4 M5
M6
M6
M12 M12 M16
Max. depth of engagement
from locating surface [mm]
6
8
10
10
13
13
16
20
28
5
Centering sleeve * [mm]
Ø 4
Ø 5 Ø 6 Ø 8 Ø 10 Ø 10 Ø 16 Ø 16 Ø 22
*) Contained in accessory pack.
5.2.1.1 Mounting of the gripper by using a spring loaded pressure-piece
CAUTION
The spring-loaded pressure piece is under spring tension.
The pressure piece can fly out in an uncontrolled fashion and
cause contusions.
•
During assembly or disassembly, be especially careful with the
springs.
When mounting the gripper from the side of the gripper fingers,
the assembly of the pressure piece must be done
after
the
mounting of the gripper.
Mounting the pressure piece is described in the insert "Installation
instructions - pressure piece", which is included in the pressure
piece's scope of delivery.
