Assembly
24
08.00 | PZN-plus | Assembly and Operating Manual | en | 0389374
5.3 Mounting the sensor
NOTE
Observe the assembly and operating manual of the sensor for
mounting and connecting.
The product is prepared for the use of sensors.
• For the exact type designations of suitable sensors, please see
catalog datasheet and
Overview of sensors
[
}
24].
• For technical data for the suitable sensors, see assembly and
operating manual and catalog datasheet.
– The assembly and operating manual and catalog datasheet
are included in the scope of delivery for the sensors and are
available at schunk.com.
• Information on handling sensors is available at schunk.com or
from SCHUNK contact persons.
5.3.1 Overview of sensors
Designation
PZN-plus
40
50
64
80 100 125 160 200 240 300 380
Magnetic switch MMS 22
X
X
X
X
X
X
X
X
X
X
X
Programmable magnetic
switch MMS-22 PI1
X
X
X
X
X
X
X
X
X
X
X
Programmable magnetic
switch MMS-22 PI2
X
X
X
X
X
X
X
Programmable magnetic
switch MMS-P 22
X
X
X
X
X
X
X
Reed switch RMS 80
X
X
X
X
X
X
X
X
X
Inductive proximity switch
IN 80
X
X
X
X
X
X
X
X
X
Flexible position sensor
FPS-S M8
X
X
X
X
X
X
X
X
Analog position sensor APS-M1
X
X
X
X
X
X
X
X
X
Analog position sensor APS-Z80
X
X
X
X
X
X
X
X
X
Radio system RSS R1/T2 with
Reed switch RMS 80
X
X
X
X
X
X
X
X
X
Force-measuring jaw FMS
X
X
X
X
X
X
X
X
