Basic safety notes
10
01.01|RP / RW / RC 1212-2128|en
and operating manual, especially the chapter "Basic safety notes"
. This applies particularly to personnel only used oc-
casionally, such as maintenance personnel.
Using personal protective equipment
When using this product, observe the relevant industrial safety
regulations and use the personal protective equipment (PPE) re-
quired!
•
Use protective gloves, safety shoes and safety goggles.
•
Observe safe distances.
•
Minimal safety requirements for the use of equipment.
Notes on particular risks
Generally valid:
•
Remove the energy supplies before installation, modification,
maintenance, or adjustment work.
•
Make sure that no residual energy remains in the system.
•
Do not move parts by hand when the energy supply is con-
nected.
•
Do not reach into the open mechanism or the movement area
of the unit.
•
Perform maintenance, modifications, and additions outside the
danger zone.
•
Secure the product during all operations against uncontrolled
activation.
•
Take a precautionary approach by maintenance and disassem-
bly.
•
Only specially trained staff should disassemble the product.
2.6
2.7
www.comoso.com
