Maintenance and care
05.00|RM 50 - 310 |en
21
Lubricants/Lubrication points (basic lubrication)
• All module bearings are life-time lubricated and do not need to
be re-lubricated.
• When disassembling the module for repairs, all bearings have
to be cleaned and re-lubricated.
We recommend the lubricants listed.
During maintenance, treat all greased areas with lubricant. Thinly
apply lubricant with a lint-free cloth.
Greasing areas, grease
Lubrication point
Lubricant
Rolling element and sliding
surfaces of the bearings *
Isoflex-Topas NCA 52
(from Klüber)
* Only after disassembling the module for repairs
Dismantling the module
NOTICE
A high degree of expertise is required for the disassembly and
assembly of the module,
The repair or elimination of defects by the customer on the mod-
ule results in the termination of the warranty and liability for all
resulting warranty and subsequent damage.
• It is recommended to have SCHUNK repair damaged and de-
fective modules.
WARNING
Risk of injury when the machine/system moves unexpectedly!
Switch off power supply.
• Disassemble the module as shown in the "Assembly drawings",
•
Only disassemble the rotation module for repair purposes.
10.3
10.4
www.comoso.com