Basic safety notes
6
05.00|RM 50 - 310 |en
Basic safety notes
Intended use
The module was designed to swivel permissible attachments or
workpieces.
The module is intended for installation in a machine/system. The
requirements of the applicable guidelines must be observed and
complied with.
The module may be used only in the context of its defined applica-
tion parameters
To use this unit as intended, it is also essential to observe the
technical data and installation and operation notes in this manual
and to comply with the maintenance intervals.
Not intended use
It is not an intended use if the module is used, for example, as a
pressing tool, stamping tool, lifting gear, guide for tools, cutting
tool, clamping device or a drilling tool.
Environmental and operating conditions
• The module may be used only within its defined application pa-
rameters.
• Ensure that the environment is clean. Observe the lubrication
• Ensure that the environment is free of splashing water and va-
pors, and also of abrasive dust and process dust. This does not
apply to modules designed especially for unclean environ-
ments.
• Do not subject the module to excessive vibrations and/or me-
chanical shocks.
• Strong magnetic fields can impair the function of the module. If
the product is to be used in strong magnetic fields, contact your
SCHUNK partner.
2
2.1
2.2
2.3
www.comoso.com
