Basic safety notes
05.00|RM 50 - 310 |en
7
Product safety
Dangers arise from the module, if:
• the module is not used in accordance with its intended purpose.
• the module is not installed or maintained properly.
• the safety and installation notes are not observed.
Avoid any manner of working that may interfere with the function
and operational safety of the module.
Wear protective equipment.
NOTE
More information are contained in the relevant chapters.
Protective equipment
Provide protective equipment per EC Machinery Directive.
Constructional changes, attachments, or modifications
Additional drill holes, threads, or attachments that are not offered
as accessories by SCHUNK may be attached only with permission
of SCHUNK.
Personnel qualification
The assembly, initial commissioning, maintenance, and repair of
the module may be performed only by trained specialist person-
nel. Every person called upon by the operator to work on the
module must have read and understood the complete assembly
and operating manual, especially the chapter "Basic safety notes"
. This applies particularly to personnel only used oc-
casionally, such as maintenance personnel.
Using personal protective equipment
When using this product, observe the relevant industrial safety
regulations and use the personal protective equipment (PPE) re-
quired!
• Use protective gloves, safety shoes and safety goggles.
• Observe safe distances.
• Minimal safety requirements for the use of equipment.
2.4
2.4.1
2.4.2
2.5
2.6
www.comoso.com
