Translation of original EC declaration of incorporation
40
03.00 | ROTA 2B | Assembly and operating manual | en | 0889059
13 Translation of original EC declaration of
incorporation
in terms of the Directive 2006/42/EG, Annex II, Part 1.B of the European Parliament and of
the Council on machinery.
Manufacturer/
Distributor
H.-D. SCHUNK GmbH & Co.Spanntechnik KG
Lothringer Str. 23
D-88512Mengen
We hereby declare that on the date of the declaration the following partly completed
machine complied with all basic safety and health regulations found in the directive
2006/42/EC of the European Parliament and of the Council on machinery. The declaration
is rendered invalid if modifications are made to the product.
Product designation:
Power Operated Chuck without through hole; ROTA 2B
in size 125; 160; 200; 250; 315; 400.
ID number
0813031; 0813040; 0813041; 0813050; 0813051; 0813060;
0813061; 0813070; 0813071; 0813080; 0813081.
The partly completed machine may not be put into operation until conformity of the
machine into which the partly completed machine is to be installed with the provisions of
the Machinery Directive (2006/42/EC) is confirmed.
Applied harmonized standards, especially:
DIN EN ISO
12100:2010
Safety of machinery - General principles for design - Risk assessment
and risk reduction
DIN EN ISO 1550:
1997+A1:2008
Machine-tools safety – Safety requirements for the design and
constructions of workholding chucks
Other related technical standards and specifications:
DIN ISO
702-1:2010-04
Machine tools – Connecting dimensions of spindle noses and work
holding chucks – Part 1: Conical connection
DIN ISO
702-4:2010-04
Machine tools – Connecting dimensions of spindle noses and work
holding chucks – Part 2: Cylindrical connection
VDI 3106:2004-04
Determination of permissible speed (rpm) of lathe chucks (jaw
chucks)
The manufacturer agrees to forward on demand the relevant technical documentation for
the partly completed machinery to state offices.
The relevant technical documentation according to Annex VII, Part B, belonging to the
partly completed machinery have been created.
Person authorized to compile the technical documentation:
Philipp Schräder, Address: see manufacturer's address
Mengen,January2014
p.p. Alexander Koch; Director for Development / Design
