Translation of the original declaration of incorporation
13
Translation of the original declaration of incorporation
in terms of the Directive 2006/42/EG, Annex II, Part 1.B of the European Parliament and of the
Council on machinery.
Manufacturer/
Distributor
H.-D. SCHUNK GmbH & Co. Spanntechnik KG
Lothringer Str. 23
D-88512 Mengen
We hereby declare that on the date of the declaration the following partly completed machine
complied with all basic safety and health regulations found in the directive 2006/42/EC of the
European Parliament and of the Council on machinery. The declaration is rendered invalid if
modifications are made to the product.
Product designation:
Power lathe chucks without through-hole
Typenbezeichnung:
ROTA NCO2 in sizes 800, 100, 1200, 1400
ROTA NCO2-JA in sizes 800, 100, 1200, 1400
ID number
1481247,1481305,01481309,1481323,
1481248,1481306,1481310,1481324
The partly completed machine may not be put into operation until conformity of the machine into
which the partly completed machine is to be installed with the provisions of the Machinery
Directive (2006/42/EC) is confirmed.
Applied harmonized standards, especially:
EN ISO 12100:2010
Safety of machinery - General principles for design -
Risk assessment and risk reduction
DIN EN
1550:1997+A1:2008
Machine-tools safety – Safety requirements for the design and
construction of lathe chucks for the workpiece mount
Other related technical standards and specifications:
DIN ISO 702-1:2010-04
Machine tools - Connecting dimensions of spindle noses and work
holding chucks - Part 1: Conical connection
DIN ISO 702-4:2010-04
Machine tools - Connecting dimensions of spindle noses and work
holding chucks - Part 4: cylindrical assembly
VDI 3106:2004-04
Determination of permissible speed (rpm) of lathe chucks (jaw chucks)
The manufacturer agrees to forward on demand the relevant technical documentation for the
partly completed machinery in electronic form to national authorities.
The relevant technical documentation according to Annex VII, Part B, belonging to the partly
completed machinery, has been created.
Person authorized to compile the technical documentation:
Alexander Koch, Address: see manufacturer's address
Mengen, November 2021
p.p. Alexander Koch; Head of Engineering Design
43
01 | ROTA NCO2, ROTA NCO2-JA | Power Chuck | en | 1506425
