Function
DANGER
Risk to life and limb of operating personnel due to the chuck
being torn off the spindle when using chuck mounting screws of
quality class 8.8
If chuck mounting screws of quality class 8.8 are used, this can
result in a risk to life and limb of operating personnel and to
substantial damage in the automated system.
•
Only use screws of property class 10.9, even if these are
panhead screws.
Chuck mounting screws of property class 10.9 can be ordered as
spare parts at SCHUNK.
8.4 Individual jaw adjustment function
By turning the spindle (item 06), the base jaw is shifted radially to
the chuck center. This displacement is used so that the jaws can be
separately and individually adapted to workpieces.
Spindle rotation to the right – jaw moves radially inwards.
Spindle rotation to the left – jaw moves radially outwards.
The jaws are adjustable by 30 mm: 15 mm inwards and outwards.
35
01 | ROTA NCO2, ROTA NCO2-JA | Power Chuck | en | 1506425