Basic safety notes
04.00|0889132_ROTA TB2 / ROTA TB2 LH |en
9
Not intended use
A not intended use of the product is for example:
•
It is used as a press, a punch, a toolholder, a load-handling
device or as lifting equipment.
•
the product is used for unintended machines or workpieces.
•
the technical data is exceeded when using the product.
•
if workpieces are not clamped properly, paying particular
attention to the clamping forces specified by the manufacturer.
•
if it is used in working environments that are not permissible.
•
if the product is operated without a protective cover.
Constructional changes
Implementation of structural changes
By conversions, changes, and reworking, e.g. additional threads,
holes, or safety devices can impair the functioning or safety of the
product or damage it.
•
Structural changes should only be made with the written
approval of SCHUNK.
Spare parts
Use of unauthorized spare parts
Using unauthorized spare parts can endanger personnel and
damage the product or cause it to malfunction.
•
Use only original spare parts or spares authorized by SCHUNK.
2.2
2.3
2.4
