Assembly
01.00|ROTA THW vario |en-US
43
Disassembling and assembling the collet chuck
The vario F can only be disassembled once it has been removed.
• Remove collet chuck with change head.
• Remove base stop (item 5).
• By removing the screws (item 12) the idle stroke bolt (item 6)
and the bayonet piece (item 7) can be removed.
• Remove screws (item 11) and remove the chuck body (item 1)
from the mount (item 2).
• Expand the fixing taper and pull it down over the mount (item
2).
The lathe chuck is disassembled in the same way but in the reverse
order.
After cleaning and oiling, we recommend storage in a closed box.
Clean the individual components and check all parts for damage
and wear.
Only use original SCHUNK spare parts when replacing damaged
parts.
The collet chuck is assembled in the same way, but in reverse
order.
8.3.4
Summary of Contents for ROTA THWvario
Page 60: ...Assembly drawing 60 01 00 ROTA THW vario en US Assembly drawing ROTA THW vario 215 62 13 13 1 ...
Page 61: ...Assembly drawing 01 00 ROTA THW vario en US 61 ...
Page 62: ...Assembly drawing 62 01 00 ROTA THW vario en US Segmented mandrel ROTA THW vario D 13 1 1 ...
Page 63: ...Assembly drawing 01 00 ROTA THW vario en US 63 Collet chuck ROTA THW vario F 13 1 2 ...