Basic safety instructions
2.5 Personnel qualification
The jaw box must only be installed, removed, started up, operated
and serviced by qualified specialist personnel with the relevant
safety training.
All persons charged with operating, maintaining and servicing this
jaw box must have access to the operating manual, especially the
chapter "Basic safety notes". We recommend that the operator
draw up in-house safety operating instructions.
Trainees may work on machines and technical equipment in which
a jaw box is installed provided that they are supervised at all times
by qualified specialist personnel.
2.6 Organizational measures
Obeying the rules
Via suitable organizational measures and instructions,
the operator must ensure that the relevant safety rules are obeyed
by the persons asked to operate, maintain and repair the jaw box.
Monitoring the behavior of personnel
The operator must at least occasionally check that the personnel
are behaving in a safety-conscious manner and are aware of the
potential hazards.
Danger signs
The operator must ensure that the signs concerning safety and
hazards mounted on the machine where the jaw box is mounted
are clearly legible and are observed.
Faults
If a fault occurs on the jaw box and this fault endangers safety or
if a problem is suspected due to production characteristics, the
machine tool where the jaw box is mounted must be immediately
stopped and remain shut down until the fault has been located
and remedied. Only allow specialists to remedy malfunctions.
Spare parts
Only ever use original SCHUNK spare parts.
Environmental regulations
Comply with the applicable legal norms when disposing of waste.
13
04.00 | | Jaw boxes SPK | en | 0889015
