Assembly and settings
8.
At air connection B (2):
Repeat the steps for the other end position.
9. Adjust the absorber stroke,
5.3.3 Adjust absorber stroke
CAUTION
Material damage to the product possible!
If the maximum adjustment range of the absorber stroke is
exceeded, this can cause leaks in the product.
•
When setting the absorber stroke, adhere to the maximum
adjustment range.
Designation
SRH-plus-D
20
25
30
35
40
50
60
Max. adjustment range
[mm]
7.5 7.5 7.5 6.5 6.5 10.5 10.5
1. Check deceleration of the movement in the end positions.
✓
If the absorber stroke is too long, the end position is
reached too slowly.
✓
If the absorber stroke is too short, the assembly impacts in
the end position.
2.
On the first shock absorber (1):
remove cover (5).
3. Fix back stop
A
(2) and loosen nut (3) on stop pin
A
(4).
4. Fix back stop
A
(2) and set stop pin
A
(4).
29
03.00 | SRH-plus-D | Assembly and Operating Manual | en | 1424337
