Maintenance
38
03.00 | SRH-plus-D | Assembly and Operating Manual | en | 1424337
7.4.2 Set shock absorber overhang
For production reasons, shock absorbers may be of different sizes. If
a shock absorber is exchanged, the new shock absorber with fitting
disks must be set to the corresponding shock absorber overhang (h).
1. First set the shock absorber overhang (h) of the shock absorber
(2) in the piston (1) with fitting disks (5)
.
2. After this, reduce the play of the shock absorber (2) to the
safety ring (3) with fitting disks (4).
✓
The shock absorber (2) must be fitted in the pistons (1) as
free from play as possible.
7.4.3 Shock absorber types and shock absorber overlap (h)
Size
Absorber
variant
Shock absorber
Shock absorber
overtap h [mm]
Tolerance [mm]
20 W
FED 14
4.6 (without
spring)
-0.2
25 W
WP-M 0.4-266
14
-0.1
30 W
WP-M 0.6-466
19.5
-0.1
35 W
WP-M 0.6-366
19.5
-0.1
40 W
WP-M 1.0-266
22
-0.1
50 W
WP-M 1.0-266
22
-0.1
60 W
WP-M
---
±0.05