Translation of original declaration of incorporation
12.00 | SWS | Assembly and Operating Manual | en | 389456
135
8.1 Annex to Declaration of Incorporation
according 2006/42/EG, Annex II, No. 1 B
1.Description of the essential health and safety requirements pursuant to 2006/42/EC,
Annex I that are applicable and that have been fulfilled with:
Product designation Quick-Change System
Type designation
SWS
To be provided by the System Integrator for the overall machine
⇓
Fulfilled for the scope of the partly completed machine
⇓
Not relevant
⇓
1.1
Essential Requirements
1.1.1
Definitions
X
1.1.2
Principles of safety integration
X
1.1.3
Materials and products
X
1.1.4
Lighting
X
1.1.5
Design of machinery to facilitate its handling
X
1.1.6
Ergonomics
X
1.1.7
Operating positions
X
1.1.8
Seating
X
1.2
Control Systems
1.2.1
Safety and reliability of control systems
X
1.2.2
Control devices
X
1.2.3
Starting
X
1.2.4
Stopping
X
1.2.4.1
Normal stop
X
1.2.4.2
Operational stop
X
1.2.4.3
Emergency stop
X
1.2.4.4
Assembly of machinery
X
1.2.5
Selection of control or operating modes
X
1.2.6
Failure of the power supply
X
1.3
Protection against mechanical hazards
1.3.1
Risk of loss of stability
X
1.3.2
Risk of break-up during operation
X
1.3.3
Risks due to falling or ejected objects
X
1.3.4
Risks due to surfaces, edges or angles
X
1.3.5
Risks related to combined machinery
X
1.3.6
Risks related to variations in operating conditions
X
