Maintenance and Care
02.00 | SWS-L | Assembly and operating manual | en | 0389037
35
8 Maintenance and Care
NOTE
The cleanliness of the work environment strongly influences the
error-free operation of the change system. If the work environ-
ment is prone to heavy contamination, it is very important that
the entire unit is protected from contamination with appropriate
measures.
Protective measures:
• Locate toolholders at a distance from sources of dust
• Include protective equipment in the storage rack (install de-
flectors, air curtains or similar equipment on the unit Require-
ments of the storage magazine)
8.1 Preventive Maintenance
The Tool Changer and optional modules are designed to provide a
long life with regular maintenance.
A visual inspection and preventive maintenance schedule is
provided in the table below depending upon the application.
Detailed assembly drawings,
Assembly drawings
[
}
52].
NOTE
All Tool Changers are initially lubricated using MobilGrease®
XHP222 Special grease. The end-user must apply additional lubric-
ant to the locking mechanism components and alignment pins
prior to start of service Link Schmierstoffe/Schmierstellen.
For this purpose, tubes of lubricant are shipped with every Tool
Changer.
NOTE:
MobiGrease® XHP222 Special is a NLGI#2 lithium complex grease
with molybdenum disulfide.
