02.00 | KSH3 IM | Assembly and Operating Manual | en | 1477686
11
Basic safety notes
•
Disconnect power sources before installation, modification,
maintenance, or calibration. Ensure that no residual energy
remains in the system.
•
Do not reach into the open mechanism or movement area of
the product during operation.
2.13.1
Protection during handling and assembly
Incorrect handling and assembly
Incorrect handling and assembly may impair the product's safety
and cause serious injuries and considerable material damage.
•
Have all work carried out by appropriately qualified personnel.
•
For all work, secure the product against accidental operation.
•
Observe the relevant accident prevention rules.
•
Use suitable assembly and transport equipment and take
precautions to prevent jamming and crushing.
Incorrect lifting of loads
Falling loads may cause serious injuries and even death.
•
Stand clear of suspended loads and do not step intotheir
swiveling range.
•
Never move loads without supervision.
•
Do not leave suspended loads unattended.
2.13.2
Protection during commissioning and operation
Falling or violently ejected components
Falling and violently ejected components can cause serious injuries
and even death.
•
Take appropriate protective measures to secure the danger
zone.
•
Never step into the danger zone during operation.
2.13.3
Protection against dangerous movements
Unexpected movements
Residual energy in the system may cause serious injuries while
working with the product.
•
Switch off the energy supply, ensure that no residual energy
remains and secure against inadvertent reactivation.
•
Never rely solely on the response of the monitoring function to
avert danger. Until the installed monitors become effective, it
must be assumed that the drive movement is faulty, with its
action being dependent on the control unit and the current
operating condition of the drive. Perform maintenance work,
modifications, and attachments outside the danger zone
defined by the movement range.
