36
02.00 | KSH3 IM | Assembly and Operating Manual | en | 1477686
Maintenance and care
•
Pull out the plug (item 81)
•
Unscrew the screws (item 84) and the fitting
screws (item 82) and disassemble the
clamping system from the machine table
•
If using clamping sleeves (item 85), remove
them from the housing
•
Remove screws (item 64) and take off the
cover strip (item 8)
•
Remove screws (item 66) and take off the
guide strip (item 6)
Remove screws (item 65) and pull out cover
(item 5) together with O-ring (item 45) and Flat
seals (item 48) out of the housing. To do this,
screw two screws into the threaded holes as an
extraction tool
for size 64: M3 x L > 25
for size 100: M3 x L > 25
for size 140: M4 x L > 25
for size 160: M3 x L > 25
for size 250: M5 x L > 25