02.00 | KSH3 IM | Assembly and Operating Manual | en | 1477686
7
Basic safety notes
2
Basic safety notes
2.1
Intended use
•
This product is intended for clamping and holding workpieces
on machine tools and other suitable technical devices.
•
It is designed to be set up on a machine table or machine
pallets.
•
Theproductmayonlybe usedwithin thescope of its technical
•
The product is intended for industrial and industry-oriented use.
•
Appropriate use of the product includes compliance with all
instructions in this manual.
2.2
Not intended use
•
The product is not being used as intended if, for example:
•
It is used as lifting equipment, as a press, as a punching tool, as
a lathe chuck, as a drill or as a cutting tool.
•
It is used in working environments that are not permissible.
•
Workpieces are not properly clamped.
•
Safety regulations are disregarded and persons are working at
this product (for example, to machine clamped workpieces)
without additional protective equipment.
•
The technical data specified by the manufacturer are exceeded
during usage.
•
It is used with machines/systems or workpieces that are not
designed to be used with it.
2.3
Constructional changes
Implementation of structural changes
By conversions, changes, and reworking, e.g. additional threads,
holes, or safety devices can impair the functioning or safety of the
product or damage it.
•
Structural changes should only be made with the written
approval of SCHUNK.
2.4
Spare parts
Use of unauthorized spare parts
Using unauthorized spare parts can endanger personnel and
damage the product or cause it to malfunction.
•
Use only original spare parts or spares authorized by SCHUNK.
2.5
Use of special chuck jaws
Requirements of the chuck jaws
