46
02.00 | KSH3 IM | Assembly and Operating Manual | en | 1477686
Appendix on Declaration of Incorporation, as per 2006/42/EC,
annex II, No. 1 B
11
Appendix on Declaration of Incorporation, as per
2006/42/EC, annex II, No. 1 B
1. Description of the basic safety and health protection requirements, as per 2006/42/EC,
annex I, that apply to and are fulfilled for the scope of the incomplete machine:
Product designation
TANDEM clamping force block, pneumatic (with inductive proximity
switches)
Type designation
KSH3 IM, KSH3-LH IM
ID number
1467595 -1467608
To be provided by the System Integrator for the overall machine
⇓
Fulfilled for the scope of the partly completed machine
⇓
Not relevant
⇓
1.1
Essential Requirements
1.1.1
Definitions
X
1.1.2
Principles of safety integration
X
1.1.3
Materials and products
X
1.1.4
Lighting
X
1.1.5
Design of machinery to facilitate its handling
X
1.1.6
Ergonomics
X
1.1.7
Operating positions
X
1.1.8
Seating
X
1.2
Control Systems
1.2.1
Safety and reliability of control systems
X
1.2.2
Control devices
X
1.2.3
Starting
X
1.2.4
Stopping
X
1.2.4.1
Normal stop
X
1.2.4.2
Operational stop
X
1.2.4.3
Emergency stop
X
1.2.4.4
Assembly of machinery
X
1.2.5
Selection of control or operating modes
X
1.2.6
Failure of the power supply
X
1.3
Protection against mechanical hazards
1.3.1
Risk of loss of stability
X
1.3.2
Risk of break-up during operation
X
1.3.3
Risks due to falling or ejected objects
X
1.3.4
Risks due to surfaces, edges or angles
X
1.3.5
Risks related to combined machinery
X
