Basic safety notes
02.00|KSPplus-BWM KSP-LHplus-BWM |en
11
Constructional changes, attachments, or modifications
Additional threads, bore holes or attachments which are not
supplied as accessories by SCHUNK may affect safety. They may
only be applied after obtaining the prior consent of SCHUNK.
Personnel qualification
Only specialist personnel may install or remove, commission or
maintain the clamping block. Specialist personnel are persons who
by their technical training, experience and knowledge are capable
of assessing the work to be performed and recognizing potential
dangers, and are thus able to take appropriate countermeasures.
Have personnel trained by the manufacturer if required.
Every person called upon by the operator to work on the clamping
block must have read and understood the complete assembly and
operating manual, especially chapter 2 "Basic safety notes".
The responsibility for operation, maintenance and repair must be
clearly specified. Only allow persons to service or repair parts of
the clamping block which are relevant to safety who can be
considered to be a specialist, as understood in the safety
regulations.
Specify the operator's responsibility, also with regard to safe
behavior, and authorize the operator to reject instructions from
third parties which breach safety regulations.
During training and instruction, personnel must only be permitted
to work with the clamping block if continuously supervised by a
specialist.
Organizational measures
Obeying the rules
Via suitable organizational measures and instructions, the opera-
tor must ensure that the relevant safety rules are obeyed by the
persons asked to operate, maintain and repair the clamping block.
2.4.1
2.5
2.6
