Basic safety notes
CAUTION
Risk of slipping or falling if the chuck's operational environment
is not clean (e.g. contaminated with cooling lubricants or oil).
•
Ensure that the working environment is clean before starting
assembly and installation work.
•
Wear suitable safety boots.
•
Follow the safety and accident-prevention regulations when
operating the chuck, especially when working with machine
tools and other technical equipment.
CAUTION
Risk of burns due to workpieces with high temperatures
Workpieces with high temperatures pose the risk of burns.
•
Wear protective gloves when removing the workpieces.
•
Automatic loading is preferred.
CAUTION
Risk of exposure to pneumatic´s exhaust noise
Noise from air system and pneumatic equipment during the
machining process.
•
Wear hearing protection.
2.4 Product safety
• Disconnect the energy supply lines and ensure that there is no
residual energy in the system when performing assembly,
modification, maintenance, or adjustment work.
• Perform maintenance work, modifications, and attachments
outside the danger zone.
• During all work, secure the system against accidental start-up.
• Do not reach into the open mechanical parts of the clamping
ring holder.
• All assembly, modifications and disassembly must be performed
by trained personnel.
Maintenance instructions
The maintenance and servicing intervals must always be complied
with. The intervals indicated refer to a standard working
environment. Operating the gripper in an environment in which it
is subjected to abrasive dusts or corrosive and/or aggressive
vapours and/or liquids requires the prior consent of SCHUNK.
9
06.00 | NSA plus 120; NSA plus 160 | VERO-S quick-change pallet system | en |
0489070
