Basic safety notes
02|NSE-M plus 138 |en
5
Basic safety notes
Risks to persons and property may arise from incorrect handling,
assembly and adjustment of this product if these instructions are
disregarded.
• Read the assembly and operating manual before assembling
and commissioning.
• Report any failures and damage immediately and repair
without delay to keep the extent of the damage to a minimum
and prevent compromising the safety of the product.
Only use original SCHUNK spare parts.
• Keep this manual available for the personnel at all times.
• If the product is passed on to a third party, these instructions
must also be passed on.
Intended use
This product is intended for positioning and clamping of clamping
pallets or workpieces. This product may only ever be employed
within the restrictions of its technical specifications. The
requirements of the applicable directives must be observed and
complied with.
The product is intended for industrial use.
Intended use also means that the user has read and understood
this operating manual in its entirety, especially the chapter “Basic
safety notes”.
Not intended use
A not intended use of the product is for example when used as:
Hoisting device, toolholder, compression mold or gripper.
The technical data are being exceeded during use.
2
2.1
2.2
