General
6
02.00|WDB 99 |en
Applicable documents
• General terms of business*
• Catalog data sheet of the purchased product *
The documents marked with an asterisk (*) can be downloaded on
our homepage schunk.com
Warranty
The warranty is valid for:
• 24 months from delivery date from the production facility or
• 500,000 cycles* for VERO-S clamping systems NSE plus 99-ZL
and WDA 99-70 or
• 250,000 cycles* for connection interfaces of VERO-S WDB 99
workpiece direct clamping modules or
• 50,000 cycles* for VERO-S clamping systems WDN-M 99-70
For use as intended under the following conditions:
• Observe the applicable documents
• Observe the ambient conditions and operating conditions,
• Observance of the specified care and maintenance instructions
Parts touching the workpiece and wear parts are not included in
the warranty.
* A cycle consists of a complete clamping process
("Open" and "Close").
Scope of delivery
• Direct workpiece clamping module
– WDB 99-60 base module
– Basic module WDG 99-60
– Raster module WDR 99-60
– WDS 99-30 stacking module
– WDS 99-50 stacking module
– WDS 99-80 stacking module
– WDS 99-120 stacking module,
– WDS 99-160 stacking module
1.1.2
1.2
1.3
