schwa-medico 104064, Instruction Manual

6 

Operating the SPORÉCUP XTR2 

Connecting cables and electrodes 

ƒ

Connect the electrodes with the cable(s) (always 2 electrodes per cable). 

ƒ

Connect the cable(s) to the XTR2 (no. 6). 

ƒ

Place the electrodes on the desired area (see examples on chapter Electrode Placement). 

Switching-ON the XTR2 

ƒ

Switch the commutator (no. 8) to the ON position. 

ƒ

Switch on the stimulator by pressing the  

z

  key (no. 5) 

The program shown on the display is the last which was used during the previous session.  

If the display shows a key symbol on the upper left side, the XTR2 has previously locked a 
specific program (see chapter locking the key pad). 
 

Selecting a program 

Select a program by pressing the 

P

 key. To scroll through the programs, press the 

P

 key as often 

as necessary until you have selected the program of your choice. To return to the previous 
program, press one of the 

▼

 keys. Selecting a program is only possible if the keypad has not 

been interlocked on one specific program (see chapter interlocking the key pad). 
 

Setting the intensity 

Start the stimulation by increasing the intensity with the 

▲

 key of the channel(s) connected to the 

electrodes.  
 

▲

 key to increase the intensity 

▼

 key to decrease the intensity 

 
The intensity of each channel is displayed on the screen. The intensity can be set between 0 and 
100 mA. By keeping the intensity keys pressed, the intensity will increase/decrease more rapidly. 

Terminating the stimulation 

You can terminate the stimulation at any time by pressing the 

P

 key. When the therapy time is 

completed the stimulation terminates automatically. If you press the  

z

  key the stimulation stops 

and the XTR2 switch off. 
 

Locking the key pad 

Choose the desired program by pressing the 

P 

key (see chapter choosing a program). 

Press and hold for 3 seconds the 

P

 key and the right 

▼

 keys to lock the stimulator on the chosen 

program. The XTR2 can now only be used with the chosen program. A key symbol appears on 
the display adjacent to the program number. All keys except the intensity and the ON/OFF keys 
are locked into this mode. Use the same key combination to unlock the stimulator.  
 

6 

SPORÉCUP XTR2   |   Instruction Manual