Switching-OFF the timer
You can use the XTR2 with or without timer. All programs run for 30 minutes.
Press and hold for 3 seconds the
E
key and the left
▼
key. The total therapy time appears on the
display. Press the
E
key to switch off the timer. The symbol “---“ appears on the display. Press
the
z
key to save the changes.
Switching-OFF the stimulator
Press the
z
key to turn off the XTR2. If the battery level is too low or if the stimulator has not
been used for the previous 2 minutes, it turns off automatically.
Charging the battery
The battery level is shown on the display with a battery symbol with 4 lines. If the battery level is
too low the stimulator switches off automatically and cannot be turned on again. The battery
needs to be re-charged.
Switch the commutator to the OFF position (no. 8)
Connect the charger with the XTR2 (socket no. 7)
Connect the charger to the mains circuit. The diode on the charger illuminates in red.
Charge the stimulator until the diode on the charger illuminates in green.
The battery is fully charged if the light on the charger appears in green.
Important!
Do not forget to switch the commutator ON again after charging.
Commutator
7
SPORÉCUP XTR2 | Instruction Manual
+
