10
USER GUIDE
Light function
Power ON/OFF: To switch on the white lighting, briefly touch the Light button. To
switch it off, touch the Light button again.
Changing the brightness: To change the brightness, long touch the Light button.
Color setting: Touch the RGB button to switch on the colored lighting. By touching it
briefly you can switch between the different colors. To switch off the lighting, briefly
press the Light button.
Automatic color change: Long touch the RGB button to activate the automatic color
change.
Charging function
Connect a USB cable to the USB port inside the 360° Ozone Steriliser. Connect the
other end of the USB charging cable to your phone or the device you want to charge.
Put the device inside the 360° Ozone Steriliser.
TROUBLESHOOTING:
The light function does not work: Check that the product is connected to a power
source.
The smartphone is not charging: Check that your smartphone is properly connec-
ted to the 360° Ozone Steriliser. Check that the 360° Ozone Steriliser is connected to
a power source.
The disinfection process does not start: Check that the 360° Ozone Steriliser is
connected to a power source. Check that the LED indicator is lit blue.
The control buttons do not work: Check that the product is connected to a power
source. If necessary, reconnect the device to the power source.
Technical data
Model
661989
Connectors
1x Micro-USB port, 1x USB port
Power supply
5 V
LED power
1.5 W
USB connection power supply
5 V
Ozone power used
0.2 W
Ozone production
10 mg/h
Sterilisation time
Approx. 20 minutes
Size
120 x 120 x 200 mm
Weight
445 g
