USER GUIDE
6
1. INTRODUCTION
Congratulations and many thanks for the purchase of the network cable tester. All devices that we
distribute comply with the safety regulations valid at the time of purchase, and are safe provided
they are used for the intended purpose. Please observe the following instructions to avoid possible
hazards, damage and malfunctions.
These Operating and Safety Instructions are included with the network cable tester.
They contain important information on how to use the product. To facilitate the reading of the
Operating and Safety Instructions, hereafter we refer to the network cable tester as "cable
tester". Please read the instruction manual carefully, in particular the safety instructions,
before using the cable tester. This particularly applies to the safety instructions. Failure to
follow these operating instructions can result in serious injury or damage to the cable tester.
Retain the instructions for future reference. If you give the cable tester to another person,
make sure it is accompanied by this instruction manual.
2. PACKAGE CONTENT
• Master unit
• Remote unit
• Operating and Safety Instructions
3. INTENDED USE / PRODUCT CHARACTERISTICS
• Cable tester for unshielded (UTP) or shielded (STP/FTP) RJ45 modular
plug systems or RJ11 (RJ12) modular network cable plugs
• Automatic test sequence
• Easy-to-read cable status, including interruptions, short circuits, and miswires
• Remote unit checks and tests long cables
Connector/cable