Installation 9
AV200pro
2
Installation
In this chapter we describe the electrical installation of the AV200pro on the
top-hat rail in the power distribution box.
Systemvoraussetzungen
•
Operating systems
: Windows XP (32 bit), Windows Vista Home Premium
(32 bit/64 bit), Windows 7 Home Premium (32 bit/64 bit), Linux (Ubuntu),
Mac (OS X) or all operating systems with network support
•
Ethernet connection
2.1
Important safety instructions
All safety and operating instructions should be read and understood before
using the device, and should be kept for future reference.
*for Germany: NAV
= Niederspan-
nungsanschluss-
verordnung (Low-
voltage Connec-
tion Ordinance) of 3
September 2010
Installation may be performed by a qualified electrician only (in acc. with Ger-
man Low Voltage Connection Ordinance (NAV)*, Part 2, §13).
Components powered by the mains supply have to be secured
with a circuit breaker.
•
The device is intended for installation on the top-hat rail in the installation
area of overvoltage category 3 or lower.
•
Never open the device. There are no user-serviceable parts inside the
device.
•
Use the device in a dry location only.
•
Do not insert any objects into the openings of the device.
•
Slots and openings on the case serve as ventilation. Never block or cover
them.
•
Do not keep the device in direct sunlight.
•
Never set up the device near a heater or radiator.
•
The device should be located only where sufficient ventilation can be ensu-
red.
•
Never use the device with a power supply that does not meet the specifica-
tions provided on the rating plate.
•
In the event of damage, contact customer service. This applies, for
example, if
