36
The receiver
Caution
Check that connections of all equipment and the
antenna are proper before connecting the receiver to
the mains.
Insert the mains plugs of the connected equipment in
the mains socket and switch them on.
Switch on the AV channel of the TV set. If the TV set
recognizes the switching voltage emitted by the receiver,
it will switch automatically to the AV mode (with Scart). In
the case of an HDMI connection select the respective
HDMI input at the TV set.
Insert the mains plug of the receiver in the mains
socket. The device is in normal mode. The current
channel location will be displayed.
The receiver is supplied with preset TV channels and can
be used directly. If you want to check if new channels are
available, initiate a programme scan. Read the
information further below on this topic.
To get into standby mode, press the red key at
top left of the remote control. The red LED lights
up on the receiver front side. The device
consumes approx. 1W only. Currently, this is a
very low value of power consumption.
Summary of Contents for DSR 6050 HD
Page 21: ...21 Connection diagram ...
Page 23: ...23 Connection diagram ...
Page 25: ...25 Connection diagram ...