14
network first. If this is the case, please proceed to step 4.
In case of Z-Wave devices, device removal from previous network can be done by following
next steps:
a. Tap the button
in the upper right corner and select “Exclude Device” option (see
Illustration 19). This action will open a new window for removing the device from previous
Z-Wave network. The remaining time for device removal will be displayed (see Illustration
20)
b. Follow manufacturer’s instructions for device removal since the process may vary from
device to device
Illustration 19 Illustration 20
In case of ZigBee devices, device removal from previous network should be done according
to manufacturer’s instructions.
4.
In order to add new device tap the “Find devices” button in the upper left corner. This action
will open a new window for adding the device. The remaining time for device integration will
be displayed (see Illustration 21).
5.
Add the device based on manufacturer’s instructions, since the process may vary from device
to device.
6.
Once the device is added to network, it will be displayed among the list of devices (Illustration 22).
NOTE:
During inclusion procedure the end user is able to abort it by pressing “Cancel” button. This
will close ZigBee, Z-Wave and IP networks.
Illustration 21 Illustration 22
Summary of Contents for HA102
Page 1: ...USER MANUAL Home Automation Gateway HA102 ...
Page 2: ......