background image

4

Congratulations and thank you for purchasing Schwaiger Home Automation 

Gateway device. Below you will find useful operating guidelines.

WARNING!

The 5V port of this unit is to be connected only to the devices whose power feeding 

meets the requirements for SELV (Safety Extra Low Voltage) and complies with Limited 

Power Source according to IEC 60950-1.

1.  IMPORTANT SAFETY INFORMATION

Before using Schwaiger Home Automation Gateway, please read the following information to avoid 
any potential dangers:

1. 

Read the instructions carefully and follow the precautions in this manual. All mains connec-
tions must be carried out by a trained and qualified person

2. 

Only use the original mains adaptor supplied with the device

3. 

Disconnect the device from mains (mains chargers) before cleaning. Clean device with a 
damp cloth, do not use detergents

4. 

Do not use device in gas-filled environments

5. 

Do not place the device near heat sources

6. 

Do not expose the device to direct sunlight

7. 

Do not place cables and/or power supplies under heavy objects. Also, avoid routes near sharp 
or abrasive objects and walkways

8. 

Keep out of reach of children

9. 

Do not carry out any maintenance on the device, instead contact your supplier

10.  Make sure that ventilation slots and the cooling unit are not covered
11.  As the device generates heat, this can lead to discoloration on the surface of furniture. Make 

sure there is at least 10cm of clearance around the device

12.  The device must not be located in the rooms with a high level of humidity e.g. kitchen, bath-

rooms, etc.

13.  Under no circumstances should you open the device or the mains adaptor. This must only be 

carried out by a qualified engineer

14.  Do not touch any contacts on the device with your fingers or metal objects. This could cause 

a short circuit

15.  Do not handle the device when your hands are wet due to risk of electric shock

Summary of Contents for HA102

























Reviews: