7
WARNUNG
• Stellen Sie sicher, dass die Stützfläche das kombinierte Gewicht aller Geräte, angebrachter Hard-
ware und Komponenten sicher trägt.
• Ziehen Sie die Schlüsselschrauben fest an, ohne diese jedoch zu überdrehen. Ein Überdrehen
kann die Schrauben beschädigen, wodurch deren Haltekraft erheblich reduziert wird.
• Stellen Sie sicher, dass die Befestigungsschrauben in der Mitte der Pfosten verankert sind. Die
Verwendung eines “Auf-Stoß”-Balkensuchers wird dringend empfohlen.
• Die mitgelieferten Schrauben dienen der Befestigung der Halterung an Pfosten durch Trockenbau-
wände oder Verputz mit Standardstärke. Der Installateur ist dafür verantwortlich, Schrauben für
andere Arten von Montagesituationen bereitzustellen.
• Verwenden Sie einen Balkensucher, um die Kanten der Pfosten zu finden. Die Verwendung eines
Auf-Stoß-Balkensuchers wird dringend empfohlen. Zeichnen Sie basierend auf den Kanten eine
vertikale Line in der Mitte des Pfostens.
• Halten Sie die Wandplatte als Vorlage an die Wand. Nun markieren Sie den Mittelpunkt der zwei
Befestigungslöcher. Stellen Sie sicher, dass sich die Befestigungslöcher in der Mittellinie des Pfos-
tens befinden.
• Bohren Sie zwei 50 mm tiefe Löcher mit 4,5 mm Durchmesser. Drehen Sie zwei Schlüsselschrau-
ben (W-A) bis auf 3 mm Abstand von der Wand ein.
LWH110B_Montageanleitung_D-GB_c.indd 7
06.03.13 09:25