12
EN
EU 430 / EU 510
High‐speed floor polishing machine
Translation of the original operating manual
Manufacturer: Schwamborn Gerätebau GmbH
Robert-Bosch-Straße 8
D-73117 Wangen / Göppingen
Telephone:
+49 (0)7161 2005-0
Telefax:
+49 (0)7161 2005-15
Email:
info@schwamborn.com
URL:
http://www.schwamborn.com
Document:
EU 430 / EU 510
Publishing date: 8.4.2016
Contents
1 Important notes
12
. . . . . . . . . . . . . . . . . . . . . . . . . .
1.1 Proper use
13
. . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2 Customer service and spare parts
13
. . . . . . .
1.3 Liability and warranty
13
. . . . . . . . . . . . . . . . . .
1.4 Symbols used
13
. . . . . . . . . . . . . . . . . . . . . . . .
2 Safety
13
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1 Accident prevention and safety
13
. . . . . . . . .
2.2 Safety instructions
14
. . . . . . . . . . . . . . . . . . . .
3 Operation
15
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1 Preparing for operation
15
. . . . . . . . . . . . . . . .
3.1.1 Replacing the dust bag
15
. . . . . . . . . . . . . . . . .
3.1.2 Setting the operating pressure
15
. . . . . . . . . . .
3.2 Operation
16
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.3 Ending the operation
16
. . . . . . . . . . . . . . . . . .
4 Maintenance
17
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.1 Adjusting the guide handle
17
. . . . . . . . . . . . .
4.2 Tilting the machine
17
. . . . . . . . . . . . . . . . . . . .
4.3 Replacing the polishing disk
17
. . . . . . . . . . . .
5 Acceptance and transportation
17
. . . . . . . . . . . . .
5.1 Machine acceptance
17
. . . . . . . . . . . . . . . . . .
5.2 Transporting the machine
18
. . . . . . . . . . . . . .
6 Declaration of Conformity
18
. . . . . . . . . . . . . . . . . .
7 Troubleshooting
19
. . . . . . . . . . . . . . . . . . . . . . . . . .
8 Technical data
20
. . . . . . . . . . . . . . . . . . . . . . . . . . .
Key to the illustrations
Pos.
Fig.
Designation
1
A
Safety switch
2
A
Lock button
3
A
Handle
4
A
Guide handle
5
A
Dust collection container
6
A
Drive motor
7
A/B
Release pedal
8
A
Transport wheels
9
A
Support wheel
10
A/F
Brush ring
11
A
Power plug (16 A)
12
C
Hook
13
C
Balancer
14
D
Pressure setting
15
E
Dust bag
16
E
Cover
17
E
Dust pipe
18
F
Drive plate
19
F
Polishing disk
20
F
Fixing plate
1 Important notes
Before using the machine, the opera
ting personnel must carefully read and
understand this operating manual!
Keep this operating manual close at
hand for easy reference!
Read and observe documents and operating manuals
provided by suppliers if available.
If the machine is on loan to other parties, the opera
ting manual must be provided with the machine and
its importance must be made clear!
Summary of Contents for EU 430
Page 48: ......
