Page 4
2. Your safety
Before Installation
We recommend this appliance to be installed or repaired by a qualified Schweigen Home
appliances technician.
Please see our website www.schweigen.com.au for recommended installers.
It is dangerous to modify any part of this appliance. Modification of any kind, will immediately void
the warranty.
do not install this Hi Flow motor to any non schweigen and/or non-silent rangehood. if you do so,
your warranty will be void.
the manufacturer declines all responsibility in case of failure to adopt proper safety measures.
ensure that the location in which this appliance is installed, has good and permanent ventilation.
Please consult local laws and regulations and install in accordance.
use an electrical connector with earth that is correct for your location.
Check that the voltage in your area corresponds to the appliance as indicated on the rating label.
Electrical Cord
ensure the supply cord is not exposed to heat, chemicals or sharp objects. if the supply cord is damaged,
it must be replaced by the manufacturer, service agent or a similarly qualified person in order to avoid
a hazard.
this guide is for the installation of a Hi Flow VX120 motor used in the Hi Flow system after the canopy/
rangehood or bathroom extraction grill has been mounted on the wall or ceiling. (Refer to canopy/
rangehood or bathroom extraction unit installation manual).
NoTE: All PVC pipe and flexi ducting measurements are referring to inside measurements, unless
otherwise mentioned.
WarNINg
Please read this section thoroughly before attempting to operate the
appliance. inspect your product upon receipt. any damage or defects
MUST be reported within 48 hours, or no claim will be recognised.
Do NoT INSTaLL THIS aPPLIaNCE IF YoU FIND IT DaMagED.
if this product is installed damaged, the supplier, nor the retailer, will be
responsible for the costs associated with the repair, replacement, removal
or re-installation of the appliances.
