background image

Page 4

 

SAFETY INSTRUCTIONS

Warning: The appliance and its accessible parts 

become hot during use. Care should be taken to 

avoid touching heating elements. 
This appliance is not intended for use by anyone 

(including children) with reduced physical, sensory 

or mental capabilities, or lack of experience and 

knowledge, unless they are supervised and/or have 

been given instruction for use of the appliance.
Cleaning and user maintenance cannot be 

performed by children without supervision. 
Children should be supervised to ensure that they 

do not play with the appliance.
Children shall not play with the appliance. Cleaning 

and user maintenance shall not be made by 

children. 

Warning: Unattended cooking on a cooktop with 

fat or oil can be dangerous and may result in fire.
NEVER try to extinguish a fire with water, but 

switch off the appliance and then cover flame e.g. 

with a lid or a fire blanket.
Warning: Danger of fire: do not store items on the 

cooking surfaces.
Caution: The cooking process has to be 

supervised. A short term cooking process has to be 

supervised continuously. 

Summary of Contents for INID77

































Reviews: