18
VarioProtect 3XL-W Digital TC | Version 1.02 | EN
Disposal, Recycling of used Devices
13.4 Change welding filter
6. Change the welding filter and slide the new welding fil-
ter into the frame, put the frame back and fasten the
screw (H).
Fig. 13: Change welding filter
13.5 Maintenance/Repair
If the welding helmet does not function properly, contact
a specialised dealer or our customer service. The con-
tact details can be found in chapter 1.2 Customer ser-
vice.
- Regularly check the condition of the helmet and
replace damaged parts.
- Replace the external / internal transparent filter
protector if it is damaged.
- Do not immerse the filter in water or other liquids.
Do not use solvents to clean the filter.
- Do not put heavy tools / objects in or on the helmet
to avoid damaging the filter or the protective
screens.
- Keep the helmet away from flames.
- Do not allow the helmet to fall down.
- Do not place the helmet too close to the welding
area.
- Be aware of the temperature:
- Remove the batteries if the helmet is not used for a
long time.
- Place the helmet so that its dimensions cannot de-
form or the viewing filter cannot break.
- Do not allow the filter to come into contact with li-
quid or dirt.
- Do not open the filter container. Do not use tools or
other sharp objects to remove parts of the filter or
helmet.
14 Disposal, Recycling of used Devices
Please take care in your own interest and in the interest of
the environment that all component parts of the machine
are only disposed of in the intended and permitted way.
14.1 Decommissioning
Discarded devices must be taken out of service immedi-
ately in a professional manner in order to avoid later mi-
suse and danger to the environment or persons.
- Remove batteries and accumulators, if available.
- If necessary, dismantle the welding helmet into mana-
geable and recyclable assemblies and components.
- Dispose of the components in the designated disposal
channels.
14.2 Disposal of the new equipment packaging
All packaging materials and packaging aids used are
recyclable and must always be sent for material recy-
cling.
These components are to be disposed of separately and
in a professional manner. In case of doubt, contact the
municipal waste disposal service.
If necessary, use the services of a specialised waste dis-
posal company for processing.
ATTENTION!
- Repairs or maintenance work may only be carried
out by qualified and trained personnel.
- Only use original spare parts.
