8
VarioProtect 3XL-W Digital TC | Version 1.02 | EN
Transport, Packing, Storage
5.1 Wearing parts
6
Transport, Packing, Storage
6.1 Transport
Check the welding helmet on delivery for any visible trans-
portation damage. If you notice any damage to the device
please report this immediately to the carrier or dealer.
6.2 Packaging
All used packaging materials and packaging aids are re-
cyclable and should be taken to a materials recycling de-
pot to be disposed of.
The delivery packaging is made of cardboard, so please
dispose carefully by having it chopped up and given to
the recycling collection
The film is made of polyethylene (PE) and the cushioned
parts of polystyrene (PS). Deliver these substances to a
collection point for recyclable materials or to the waste
disposal company which looks after your region.
6.3 Storage
The welding helmet must be stored thoroughly cleaned
in a dry, clean environment at temperatures ranging from
-20 °C to +70 °C.
The solar cells of the filter should be stored in the dark or
not exposed to light.
The solar cells of the filter should be stored in the dark
and not exposed to light.
Mode
Previous
Mode
Condition
Sleep
mode
(energy
saving
mode)
Grinding
In grinding mode and without
pressing any button for 45 mi-
nutes, the filter will go into
OFF function. When the ambi-
ent light intensity is lower than
10 lux, the device will go into
sleep mode.
Cutting
Without pressing any key for
45 minutes from the last time
the arc signal was received,
the filter will go into OFF func-
tion. When the ambient light
intensity is lower than 10 lux,
the device will go into sleep
mode.
Welding
Without pressing any key for
45 minutes from the last time
the arc signal was received,
the filter will go into OFF func-
tion. When the ambient light
intensity is lower than 10 lux,
the device will go into sleep
mode.
Wake-up
mode
Grinding
If the environmental light in-
tensity is more than 10 lux or
any key is pressed for 0.1 s,
the filter will become active
and changes into the grinding
mode.
Cutting
If the environmental light in-
tensity is more than 10 lux or
any key is pressed for 0.1 s,
the filter will become active
and changes into the cutting
mode.
Welding
If the environmental light in-
tensity is more than 10 lux or
any key is pressed for 0.1 s,
the filter will become active
and changes into the welding-
mode.
NOTE!
1. When you want to put the device into sleep mode,
you must not press OFF. In OFF mode, the filter
only shuts down the screen and reduces power
consumption. It is still in working mode. In OFF
mode and when the ambient light intensity is less
than 10 lx, the filter will switch to sleep mode.
2. After waking up from sleep mode, the filter may
not work in normal way for the next 10 s.
Designation
Item
number
Packing
unit /
Price unit
Con-
tent
Äußere Vorsatz-
scheibe
1662100
PU
10
Innere Vorsatz-
scheibe
1662101
PU
10
Seitenscheiben-
Set
1662130
1 Set =
2 Pcs.
Stirnschweißband
1662122
Pcs.
Stirnband komplett
1662123
Pcs.
Schweißhelmge-
häuse
1662134
Pcs.
Filterkassette
1662135
Pcs.
Vergrößerungs-
linse 2,0
1662106
Pcs.
