13
Note:
Your machine may not match the image. For reference only.
Tools required:
pedal wrench, #2 Phillips screwdriver
1.
Remove the Pedals. Refer to the “Replacing the Pedals”
procedure in this manual.
2.
Using a #2 Phillips Screwdriver, remove the hardware that
attaches the Left and Right Shrouds. Note the locations of the
different types of screws. Slowly remove the Shrouds. Set the
hardware safely aside for reassembly.
Note:
To make removal of each Shroud easier, push the
Handlebar on that side to the forward position.
Disconnect the data cable from the console before you service this machine.
Replacing the Shrouds and Vent Cover
X2
X4
X5
X4