Operation
Dismounting the unit
There are four ways to stop the Schwinn
®
Evolution
®
Bike pedals.
1. Pedal slower until you come to a complete stop.
2. Increase the resistance by turning the resistance adjustment control clockwise until you come to a complete stop.
3. Engage the emergency brake by pushing DOWN firmly on the emergency brake lever that extends from the resistance
adjustment knob. Continue applying pressure until the wheel has come to a complete stop.
nOTE:
The Schwinn
®
Smart Release
™
system feature is standard on the Schwinn
®
Evolution
®
SR. Please verify that your
exercise bike has this feature before utilizing stopping method #4.
4. Apply back pressure to the pedals and the Smart Release
™
system will activate. Continue applying pressure until both
the pedals and the flywheel come to a complete stop.
WARNING! The flywheel momentum of the Schwinn
®
Evolution
®
Bike will keep the pedals turning even after the
rider stops pedaling or the rider’s feet slip off. DO NOT ATTEMPT TO DISMOUNT THE BIKE OR REMOVE YOUR FEET
FROM THE PEDALS UNTIL BOTH THE PEDALS AND THE FLYWHEEL HAVE COMPLETELY STOPPED. Failure to follow
these instructions may lead to loss of control and serious personal injury.
Owner’s Manual
10
